XED-PN08M02M-D125W
Full Gigabit non-management POE switch
- 8*1000Mbps self-adaptive network ports
- 2*1000Mbps self-adaptive cascade ports
- Built-in power supply,total power is up to 125W
Specifications
| Model No. | XED-PN08M02M-D125W 100M+ Gigabit non-management POE switch |
| Fixed ports | 8*1000Mbps self-adaptive network ports |
| 2*1000Mbps self-adaptive cascade ports | |
| PoE Standard | IEEE802.3af/at |
| Max output power of a single port | 30W |
| Max output power of the whole PoE | 125W |
| POE functional ports | Port1- Port8 |
| POE protection | Support OCP (Over-current protection) |
| Support OVP (Over-voltage protection) | |
| Support SCP (Short-circuit protection) | |
| POE other functions | Turn on the ports in sequence( Avoid excessive inrush current) |
| High power PD soft start | |
| POE power supply type | Pins 1/2(+)，pins 3/6(-)； 4 cores powered |
| Forward mode | Full wire-speed store and forward |
| Forwarding Rate | 10M：14880pps/port |
| 100M：148809pps/port | |
| 1000M：1488095pps/port | |
| Backplane bandwidth | 20Gbps（nonblocking） |
| MAC address table | 4K |
| Support automatic update, two-way learning | |
| LED indicator light | Power：power supply indicator light; the power status of the PoE switch |
| VLAN: Vlan mode opened when the function switch moved to “ON” and the light turns on | |
| LINK/ACT：The link of ports get normal when the light is on; when the light keeps flashing,that the datas is transmitting. | |
| Support POE Protocols | IEEE 802.3af，Ethernet power supply POE standard |
| IEEE 802.3at，Power supply over Ethernet POE+ standard | |
| IEEE 802.3， Ethernet Media Access Control | |
| IEEE802.3i 10Base-T Ethernet | |
| IEEE 802.3u，100Base-TX Fast Ethernet standard | |
| IEEE 802.3ab，1000Base-T Gigabit Ethernet standard | |
| IEEE 802.3z，Gigabit Ethernet fiber standard | |
| IEEE 802.3x Full-duplex Ethernet data link laminar flow control | |
| Loop Protection | Supports loop protection, real-time monitoring, intelligent blocking, and automatic recover |
| Port isolation（VLAN） | Support Downstream ports can be isolated from each other and communicate with upstream ports |
| Port flow control | Support half duplex based on back pressure control; |
| Supports full duplex based on PAUSE frames | |
| Broadcast storm suppression | All ports support broadcast storm suppression based on packet forwarding rate |
| Physical medium | 10Base-T：2 pairs 3 or higher Unshielded Twisted Pair EIA/TIA-568 Standard (≤ 100M) |
| 100Base-TX：2 pairs or 4 pairs more than Class 5 Unshielded Twisted Pair EIA/TIA-568 Standard (≤ 100M) | |
| 1000Base-T：4 Pairs of unshielded twisted-pair cables over class 5 (Class 6 is recommended) EIA/TIA-568 standard (≤ 100M); | |
| Cable line sequence | Supports Auto-MDIX to automatically identify straight-through cables and crossover cables |
| Negotiation Mode | Ports support auto-negotiation (auto-negotiation transfer rate and duplex mode) |
| PHY detection | Supports network cable connectivity detection |
| Working temperature | -0~40°C |
| Storage temperature | -40~70°C |
| Working humidity | 10%～90% No condensation |
| Storage humidity | 5%～95% No condensation |
| Weight | PoE weight（Exclude package）：≤0.8Kg |
| Total weight：≤1.2Kg | |
| Input power supply | AC：180-240V ~ 50-60Hz/ 1.5A Max |
| Protective performance | Port lighting protection：4KV 8/20μs |
| Protection rate：IP30 | |
| Dimensions(L×W×H) | 190mm×140mm×43mm |
| Installation methods | Desktop installation |
| Wall mount installation | |
| Storage precautions | The warehouse shall be clean, ventilated, free of corrosive gases, inflammable, explosive and other corrosive chemicals; Keep away from heat source and strong mechanical vibration |
| Warranty | 2 years |
Get the Latest News
